Can be used to connect the cable shield (screen) if required. Key Specifications Power Supply: 8V to 11V provided directly through the loop. Current Consumption: Maximum 0.5 mA in standby.

Typically used for the positive (+) line of the DPLS.

The detector is connected via a (DPLS) to a controller, such as the S2000-KDL or S2000-KDL-2I.

💡 After physical connection, you must assign a unique address (1–127) to each detector using the UProg software or a programming command from the S2000M console.

The (specifically models like DIP-34A-03 or DIP-34A-04) is an addressable analogue smoke detector used in the "Orion" integrated security system by Bolid. Connection Overview

You must strictly observe the "+" and "–" polarity of the loop when connecting to the detector's base. Terminals:

Typically used for the negative (–) line of the DPLS.