20 Clipszip - Styxhips

Place the zipper pull into the jig (wrong side up).

This method is used to create custom-length zippers for sewing projects like bags or pockets. Zipper Tape: (By the yard/meter) Zipper Sliders/Pulls: (20+ pcs) Zipper Jig or Helper: (Optional, but recommended) Scissors Pliers (for stopping) 1. Prepare the Zipper Tape StyxHips 20 Clipszip

Ensure your zipper pulls match the size of your zipper tape (e.g., #5 sliders for #5 tape). Place the zipper pull into the jig (wrong side up)

If the zipper teeth are not aligning correctly, pull the slider back off and ensure one side of the tape is slightly shorter (staggered) before re-inserting it. Mesh Projects: If using with mesh, topstitch 18one-eighth inch from the edge to secure it. Prepare the Zipper Tape Ensure your zipper pulls

Cut your zipper tape to the desired length for your project. Trim Teeth: At one end, remove about 12one-half

Pull the zipper tape toward you. It will "click" or slide onto the tape, joining the teeth. Remove: Pull the fully attached slider off the jig. 3. Secure the Zipper (Stopping) To prevent the zipper pull from sliding off the end:

Place a small metal bottom stop with pliers to secure it permanently. Tips for Success